Overestimate of remediation efficiency due to residual sodium persulfate in PAHs contaminated soil and a solution

Oxidation remediation is a commonly used technology for PAHs contaminated soil presently,but the overestimate of efficiency due to ongoing remediation by residual oxidants during extraction and testing has not been paid enough attention.In this study,persulfate was activated by Fe（Ⅱ） to inve stigate the effects of residual oxidants on PAHs removal during detection process and the elimination effects of adding Na₂ SO₃ and extending sampling time on residual oxidants.Results ...     

H-酸的催化湿式氧化反应过程研究

湿式氧化（ＷＡＯ）和催化湿式氧化（ＣＷＡＯ）都能有效地处理染料中间体－－Ｈ－酸。所有的Ｈ－酸在５ｍｉｎ内均被支除和形成一些中间产物。在不同反应时间段测定了ｐＨ值及阴、阳离子和小分子有机酸等中间产物。分析表明,ｐＨ值与ＣＯＤ的去除及有机酸的产生有密切的联系,Ｈ－酸被氧化成ＮＨ４＾＋、ＳＯ４＾２－、ＨＣＯＯＨ和ＣＨ２ＣＯＯＨ。ＷＡＯ法的瓜速率慢而且氧化乙酸困难。而ＣＷＡＯ法的反应速率不但快而且能有效地     

升流式厌氧污泥床--压力式好氧接触氧化工艺处理制药废水的实践

采用升流式厌氧污泥床—压力式好氧接触氧化工艺处理锦州九洋药业有限责任公司制药废水,该工艺技术成熟、处理效率高,运行稳定可靠。结果表明处理后的出水水质可以满足排放标准的要求。     

氧化亚铁硫杆菌对亚铁离子的氧化及其动力学研究

采用9K培养基研究了氧化亚铁硫杆菌氧化Fe^2＋过程中,pH和氧化还原电位的变化规律,并对Fe^2＋的氧化过程进行动力学分析,确定了其反应级数及反应速率常数。结果表明,（1）在温度为30℃,摇床转速为150r／min的条件下,氧化亚铁硫杆菌的最佳接种量为10．0％;（2）Fe^2＋初始质量浓度在11．39～21．72g／L时,随着浓度的增大,Fe^2＋达到100％转化率需要的时间增加;（3）氧化亚铁硫杆菌对Fe^2＋的氧化可近似看作一级反应,反应速率常数为0．0527～0．0788h。     

改性氧化铝微波诱导氧化处理雅格素蓝BF-BR染料废水的研究

采用微波诱导氧化工艺(MIOP)技术,以改性氧化铝为催化剂,对雅格素蓝BF-BR染料模拟废水进行氧化处理．优化了处理工艺条件,实验在固液质量比为1：10(50mL雅格素蓝BF-BR水溶液中投加5．0g改性氧化铝)、微波功率为400W的条件下微波辐照处理5min．在此工艺条件下,对水中雅格素蓝BF-BR的脱色率可达到98％,COD去除率为87．4％．改性氧化铝在重复使用9次后仍能保持很高的脱色率．进一步研究表明在微波辐射场中废水中的有机污染物在改性氧化铝表面通过吸附．氧化协同作用而被迅速降解．反应动力学研究表明,该氧化过程符合一级反应动力学规律,反应速率常数k=0995min^-1,反应半衰期t1/2=0．697min．实验结果显示,在本实验中改性氧化铝比颗粒活性炭具有更高的催化活性．     

影响三沟式氧化沟脱氮效果的2个重要参数

运行周期中反硝化运行和硝化运行的时间比ｔＤＮ／ｔＮ是平衡处理系统反硝化,硝化能力的重要参数,实验室条件下分别比较了ｔＤＮ／ｔＮ为０．２７,０．４０,０．４７,０．７５和１．０的５种不同组合的运行效果。结果表明,当ｔＤＮ／ｔＮ为０．４０时,即硝化能力略大于反硝化潜能时,脱氮效果最好。     

高锰酸钾净水的氧化副产物研究

在高锰酸钾预氧化条件下 ,对北京京密引水渠水和松花江水进行混凝处理 ,并将原水与出水水样经色谱 质谱联用仪分析 ,以 1997年美国国家环保局 (USEPA)提出的饮用水规程和健康建议为标准 ,初步探讨了高锰酸钾净水过程中产生的副产物是否对人体有毒害作用 .试验结果表明 :在试验条件下 ,尚未发现高锰酸钾氧化生成USEPA规定的有毒有害副产物 ,并认为其原因可能与高锰酸钾氧化作用方式以及氧化过程中生成的新生态水合二氧化锰的吸附作用有关 .     

含硫油品储罐自燃着火原因的研究

简述了储罐中硫化亚铁形成的过程和硫化亚铁引发储罐自燃的机理,并模拟储罐中硫化亚铁的形成过程,对其进行氧化实验,证明储罐腐蚀产物一硫化亚铁氧化放热是引发储罐着火的原因之一。     

碳纳米管催化电极处理难降解有机物研究进展

难降解有机物严重污染环境和威胁人类身体健康,因此难降解有机物的治理技术研究是目前水污染防治研究的热点与难点。碳纳米管(CNTs)由于具有独特的一维结构、良好的化学稳定性、优异的电荷传导性能以及独特的电学性能,近些年被广泛应用做电极材料。介绍了碳纳米管的电化学特性,对碳纳米管催化电极的制备、催化反应机理及其在有机污染物处理过程中的应用进行了概述,并对其应用前景进行了展望。     

Quantification of potassium permanganate consumption and PCE oxidation in subsurface materials

A series of laboratory scale batch slurry experiments were conducted in order to establish a data set for oxidant demand by sandy and clayey subsurface materials as well as to identify the reaction kinetic rates of permanganate (MnO(4)(-)) consumption and PCE oxidation as a function of the MnO(4)(-) concentration. The laboratory experiments were carried out with 31 sandy and clayey subsurface sediments from 12 Danish sites. The results show that the consumption of MnO(4)(-) by reaction with the sediment, termed the natural oxidant demand (NOD), is the primary reaction with regards to quantification of MnO(4)(-) consumption. Dissolved PCE in concentrations up to 100 mg/l in the sediments investigated is not a significant factor in the total MnO(4)(-) consumption. Consumption of MnO(4)(-) increases with an increasing initial MnO(4)(-) concentration. The sediment type is also important as NOD is (generally) higher in clayey than in sandy sediments for a given MnO(4)(-) concentration. For the different sediment types the typical NOD values are 0.5-2 g MnO(4)(-)/kg dry weight (dw) for glacial meltwater sand, 1-8 g MnO(4)(-)/kg dw for sandy till and 5-20 g MnO(4)(-)/kg dw for clayey till. The long term consumption of MnO(4)(-) and oxidation of PCE can not be described with a single rate constant, as the total MnO(4)(-) reduction is comprised of several different reactions with individual rates. During the initial hours of reaction, first order kinetics can be applied, where the short term first order rate constants for consumption of MnO(4)(-) and oxidation of PCE are 0.05-0.5 h(-1) and 0.5-4.5 h(-1), respectively. The sediment does not act as an instantaneous sink for MnO(4)(-). The consumption of MnO(4)(-) by reaction with the reactive species in the sediment is the result of several parallel reactions, during which the reaction between the contaminant and MnO(4)(-) also takes place. Hence, application of low MnO(4)(-) concentrations can cause partly oxidation of PCE, as the oxidant demand of the sediment does not need to be met fully before PCE is oxidised.